Bhaskar Industries
Malad West, Mumbai, Maharashtra
GST No. 27AEYPB6711P1ZT
TrustSEAL Verified
Call 0804895814845% Response Rate
SEND EMAIL
Oil Pump, Water & waste water pumps, Chilling Pump, Submersible pumps, Dewatering Pump, Sewage Pump, Paint & Ink, Pulp & paper industries.
Product Details:
| Minimum Order Quantity | 6 Piece |
| Seal Body | SS-304/SS-316 |
| Size | 12 mm TO 100 mm |
| Brand | BHASKAR INDUSTRIES |
| Usage/Application | Water, Mild Chemicals |
| Secondary Seal | HI-NBR, VITON |
| Country of Origin | Made in India |
MECHANICAL SEAL : BG1-S20, B-G12, B-G13
These series of seals are used for plain shafts, these are single coil Unbalanced seals having elastomer bellows and are Independent of direction of rotation.
Dimensions of BG1-S20,B-G12,B-G13 series seals are same as for B-G1 but with extended bellows tail to achieve fitting length
TO BE USED FOR :
Oil Pump, Water & waste water pumps, Chilling Pump, Submersible pumps, Dewatering Pump, Sewage Pump, Paint & Ink, Pulp & paper industries.
MATERIAL:
Seal Faces:Carbon / Tungsten Carbide / Ceramic / Silicon Carbide
Elastomers:Nitrile / Viton / EPDM / Silicon / Neoprene As Per Application
Metal Components:SS 304 / SS 316
OPERATING LIMITS :
Shaft Dia:12mm to 100 mm
Pressure:16 bar
Temperature:-20 c TO 140 c
Additional Information:
Product Details:
| Minimum Order Quantity | 6 Piece |
| Usage/Application | Sewage, Water, Mild Chemicals |
| Type | For Dewatering Pumps, Agricultutre pumps, Centrifugal Pumps |
| Material | Stainless Steel |
| Size | 12 mm to 100 mm |
| Brand | BI |
| Suitable For | MG-1 |
| Usage/ Application | AGRICULTURE PUMPS |
| Pressure | 16 bar |
| Temperature range | -20 c TO 140 c |
| Size (Millimeter) | 12 mm To 100 mm |
| Hardness (Hv) | 65-70 |
| Color | BLACK |
| Shape | Round |
RUBBER BELLOW MECHANICAL SEAL : M-G1, MG1-S20, M-G12, M-G13
These series of seals are used for plain shafts, these are single coil Unbalanced seals having elastomer bellows and are Independent of direction of rotation.
These B-G1 series seals can also be used as a double seal in tandem or back to back arrangement. Dimensions of BG1-S20,B-G12,B-G13 series seals are same as for B-G1 but with extended bellows tail to achieve fitting length
TO BE USED FOR :
Oil Pump, Water & waste water pumps, Chilling Pump, Submersible pumps, Dewatering Pump, Sewage Pump, Paint & Ink, Pulp & paper industries.
MATERIAL:
Seal Faces:Carbon / Tungsten Carbide / Ceramic / Silicon Carbide
Elastomers:Nitrile / Viton / EPDM / Silicon / Neoprene As Per Application
Metal Components:SS 304 / SS 316
OPERATING LIMITS :
Shaft Dia:12mm to 100 mm
Pressure:16 bar
Temperature:-20 c TO 140 c
Additional Information:
Product Details:
| Minimum Order Quantity | 6 Piece |
| Seal Body | SS-304 |
| Size | 12 mm To 75 mm |
| Brand | BI Seals |
| Diameter | 20 mm and above |
| Usage/Application | Water, mild Chemicals |
new robin rubber bellow MECHANICAL SEAL :
(CODE - B-R43)
These series seals used for plain shafts, these are Single Coil Unbalanced seals having elastomeric bellows & are Independent of direction of rotation. The design of B-NR43 type seals eliminates the sliding action between the seal and the shaft. This not only prevents the shaft from being damaged by fretting, but also enables it to readily follow shaft run-out or pump misalignment.
TO BE USED FOR :
Water Pump, Submersible Pump, Sewage Pump, etc.
MATERIAL :
· Seal Faces :Carbon / Tungsten Carbide / Ceramic / Silicon Carbide.
· Elastomers :Nitrile / Viton / EPDM / Silicon / Neoprene As per application.
· Metal Components :SS 304 / SS 316
OPERATING LIMITS :
· Shaft Dia :12mm to 75 mm
· Pressure :12 Bar
· Temperature :60 c TO 160 c
Additional Information:
Product Details:
| Size | 14 mm,15 mm,16 mm |
| Model No. | B-RS43 |
| Brand | Boritkars Technosmart |
TO BE USED FOR :
Water Pump, Submersible Pump etc.
MATERIAL :Additional Information:
Product Details:
| Minimum Order Quantity | 6 Piece |
| Material | Rubber |
| Brand | BI |
| Size | 12 mm to 75 mm |
| Model Name/Number | B21 |
| Application | Paint & ink,pulp & paper industries,Oil Pumps,Chilling Pump,Dewatering Pump,S |
| Usage/Application | Pump |
| Pressure | 16 Bar |
| Working Temperature (Degree Celsius) | 60-160 |
| Shaft Dia | 12 mm to 75 mm |
Mechanical Seal is used for plain shafts, these seals are compact, single coil unbalanced seals having elastomer bellows and are Independent of direction of rotation. Design of bellow is pressure supported & eliminates creases or folds. Metal Lugs of these seals creates positive mechanical drive which protects elastomer bellows from overstressing.
Additional Information:
Product Details:
| Minimum Order Quantity | 6 Piece |
| Size | 16 mm - 50 mm |
| Usage/Application | Pump Seals |
| Material | Stainless Steel |
| Suitable For | Pumps |
| Model No. | B-JC2 |
| Brand | BI Seals |
MECHANICAL SEAL : B-jc2
These series seals used for plain shafts, these are Single Coil Unbalanced seals having elastomeric bellows & are Independent of direction of rotation. The design of B-JC2 type seals eliminates the sliding action between the seal and the shaft. This not only prevents the shaft from being damaged by fretting, but also enables it to readily follow shaft run-out or pump misalignment.
TO BE USED FOR :
Water Pump, etc.
MATERIAL :
Seal Faces :
Carbon / Tungsten Carbide / Ceramic / Silicon Carbide.
Elastomers :Nitrile / Viton / EPDM / Silicon / Neoprene As per application.
Metal Components :SS 304 / SS 316
OPERATING LIMITS :
Shaft Dia :16mm to 50 mm
Pressure :12 Bar
Temperature :60 c TO 160 c
Additional Information:
Product Details:
| Minimum Order Quantity | 12 Piece Onwards |
| Brand | Diekin |
| Compressor Type | Reciprocating Compressor |
| Diameter | 1.125'' / 1.250'' / 1.750'' |
| Grade | Elastomer - Neoprene |
| Length | Depends on Products |
| Material | Mild Steel |
Material :
Seal Face | Elastomer | Metal Components |
S.S. Stellight, Carbon
| Neoprene, Viton | Mild Steel |
Operating Limits :
Shaft Dia: 1.125', 1.250' & 1.750'
TO BE USED FOR :
Compressor, Refrigeration Pump, e.t.c
Additional Information:
Product Details:
| Minimum Order Quantity | 12 Piece |
| Size | 12 mm to 70 mm |
| Brand | Boritkar Technosmart |
These B-21LT series of seals are used for plain shafts, these seals are compact, single coil unbalanced seals having elastomer bellows and are Independent of direction of rotation.
Design of bellow is pressure supported & eliminates creases or folds; Metal Lugs of these seals creates positive mechanical drive which protects elastomer bellows from overstressing.
Paint & ink, pulp & paper industries, Oil Pumps, Chilling Pump, Dewatering Pump, Sewage Pump, etc.
MATERIAL :Additional Information:
Product Details:
| Minimum Order Quantity | 12 Piece |
| Size | 12 MM TO 75 MM |
| Brand | B-TECHNOSMART |
ROBIN TYPE MECHANICAL SEALS :
(CODE NO – B-R43, B-NR43, B-RSO)
These series seals used for plain shafts, these are Single Coil Unbalanced seals having elastomeric bellows & are Independent of direction of rotation. The design of B-R43, B-NR43 & B-RSO type seals eliminates the sliding action between the seal and the shaft. This not only prevents the shaft from being damaged by fretting, but also enables it to readily follow shaft run-out or pump misalignment.
TO BE USED FOR :
Water Pump, Submersible Pump, Sewage Pump, etc.
MATERIAL :
· Seal Faces :Carbon / Tungsten Carbide / Ceramic / Silicon Carbide.
· Elastomers :Nitrile / Viton / EPDM / Silicon / Neoprene As per application.
· Metal Components :SS 304 / SS 316
OPERATING LIMITS :
· Shaft Dia :12mm to 75 mm
· Pressure :12 Bar
· Temperature :60 c TO 160 c
Additional Information:
Product Details:
| Minimum Order Quantity | 12 Piece |
| Size | 12 mm To 70 mm |
| Brand | Boritkars Technosmart |
john crane 2100 MECHANICAL SEALS :
(Code no - B-21st)
These B-21ST series of seals are used for plain shafts, these seals are compact, single coil unbalanced seals having elastomer bellows and are Independent of direction of rotation.
Design of bellow is pressure supported & eliminates creases or folds; Metal Lugs of these seals creates positive mechanical drive which protects elastomer bellows from overstressing.
TO BE USED FOR :
Paint & ink, pulp & paper industries, Oil Pumps, Chilling Pump, Dewatering Pump, Sewage Pump, etc.
MATERIAL :
· Seal Faces :Carbon / Tungsten Carbide / Ceramic / Silicon Carbide
· Elastomers :Nitrile / Viton / EPDM / Silicon / Neoprene As Per Application
· Metal Components :SS 304 / SS 316
OPERATING LIMITS :
· Shaft Dia :10mm to 70 mm
· Pressure :16 Bar
· Temperature :60 c TO 160 c